Google Ads Invalid Clicks: What the New Invalid Traffic Card Shows and What to Check
The short answer
Google Ads invalid clicks, the clicks Google filters out because they don’t show genuine interest in your business, now have their own card in the account. On November 12, 2026, Google began rolling out an Invalid traffic card on the Overview page that shows two numbers: estimated savings from traffic filtered before you were billed, and credited cost for traffic caught afterward. You aren’t charged for either. The card is a reason to check four places in your account, and to fix the things Google’s filters don’t cover.

On this page
- What changed on November 12, 2026
- What counts as Google Ads invalid clicks
- Filtered or credited: the two stages
- Where to see Google Ads invalid clicks
- How to read the numbers
- Six checks to run this week
- What the filters can’t stop: invalid leads
- When to ask Google to investigate
- The copy-ready checklist
- A worked example: a roofing company
- Frequently asked questions
What changed on November 12, 2026
Google has filtered invalid traffic for as long as it has sold ads, but most of that work was invisible. An advertiser could add a column or two to a table and look for an adjustment line on an invoice, and that was about it. On November 12, 2026, Google announced the Invalid Traffic Overview Card and said that, for the first time, businesses can see both the amount saved and the credits Google provides for invalid activity, inside Google Ads.
Three points from the announcement and the updated help pages matter for planning:
- It’s a reporting change, not a billing change. Google says it doesn’t charge for invalid traffic, and that it issues a credit when it detects the traffic later, “where appropriate and possible.” That was already the rule. What’s new is seeing the totals in one place.
- The rollout is gradual. Google’s help page on invalid traffic says the card “may not be available in your account yet.” If you can’t find it, the older views in this guide still work.
- Leads are part of the story. In the same post, Google says it has reduced advertiser exposure to invalid leads by an average of 30% so far in 2026. Its help pages are also clear that lead quality is a shared job, which we cover below.
We read every page cited here on November 16, 2026. This is a research-based guide: the menu paths and limits are Google’s own, and the example near the end is invented.
What counts as Google Ads invalid clicks
Google’s definition is short: invalid clicks are clicks on your ads that don’t represent a genuine interest in your business. Invalid traffic is the wider term, and it also covers impressions, other interactions and conversions. Google’s help pages give four kinds:
- Non-human traffic. Bots and automated software that click and load ads to mimic how people browse.
- Accidental clicks. Clicks caused by poor ad placement, such as an ad placed too close to a navigation button.
- Fraudulent ad placements. “Clickjacking,” which tricks someone into clicking an invisible ad, and “ad stacking,” where a publisher layers several ads so that only the top one can be seen.
- Other invalid activity by people. Competitors clicking to run up your spend, publishers paying users to click ads, and impressions meant to push your click-through rate down.
Google says the list isn’t exhaustive. It also says something that surprises many advertisers: a click you would call worthless isn’t necessarily invalid. Someone who searched for a job at a roofing company and clicked a roofer’s ad is a real person with a real interest, just not the one you wanted. That click is billed. Keywords, negatives and location settings deal with those clicks, not the invalid-traffic filters.
Filtered or credited: the two stages
Most confusion about Google Ads invalid clicks comes from mixing up two stages. Google’s help pages describe them separately, and the new card reports them as two separate numbers.
Stage 1: filtered before you’re billed
Google says it catches most invalid traffic as it happens or shortly after. If an interaction is identified as invalid before the end of the billing cycle, you don’t pay for it, and Google removes the impressions, clicks, interactions and conversions from your campaign metrics. In Google’s words, “no refunds are necessary,” because the charge never reaches your invoice.
Two side effects are worth knowing. First, the cost goes back into the campaign: Google says it restores the cost to your campaign budget and then tries to spend it on valid traffic, within your normal monthly limits. Second, your reports can occasionally show more conversions than clicks. That happens when a click leads to a conversion and Google later filters the click but keeps the valid conversion.
Stage 2: credited after you’re billed
Some patterns take longer to find, and Google says it also analyzes traffic over longer periods. When it detects invalid traffic after the billing cycle has closed, it issues an invalid activity credit in the next billing cycle, again “when appropriate and possible.” The credit appears on your invoice and in your account transactions as an “Invalid activity” adjustment.
One detail trips up anyone comparing an invoice with a campaign report: Google freezes campaign metrics at the end of the month so they match the invoice. A credit issued in March for February traffic doesn’t change February’s clicks or cost in your campaign tables. To see the numbers with credits applied, you need the credit report described in the next section.
Google also removes some conversions that came from invalid traffic, and it says this can happen after they first appeared in your account, which looks like a small drop in conversions over time. The data discrepancies page explains this and other reasons Google Ads and your analytics tool disagree.
Where to see Google Ads invalid clicks
There are now four places to look. Each one answers a different question.
1. The Invalid traffic card on the Overview page
Open the Overview page in the Campaigns menu and find the card titled “Invalid traffic.” It summarizes your selected date range with two metrics:
- Estimated savings: the estimated cost saved by Google’s automated protections, which include automated filters and proactive manual reviews.
- Credited cost: the amount credited back to you for past invalid activity that was detected after the billing period ended.
Select “View details” for a breakdown page with daily graphs, a table of all campaigns and direct links to the invoices that carry the credits.
2. The Invalid clicks column
This older view works in every account. Go to Campaigns, click the Columns icon above the table, search for “Invalid clicks” and apply it. The column counts clicks that Google filtered before billing. They aren’t included in your Clicks or Cost columns. Google’s help page mentions an Invalid interactions column too, for campaign types that count interactions.
3. Billing: the Invalid activity adjustment
Go to Summary in the Billing menu. In the card for a month, open the “Adjustments” dropdown and look for a line labeled “Invalid activity.” That’s a credit for traffic you were billed for earlier. Google says the credit line items show the original month of service and the campaign.
4. The Invalid Activity Credit Report
The Invalid Activity Credit Report lives in the Report Editor, under the Template gallery, as “Invalid Activity Credit Report: Search & PMax.” It breaks credits down by campaign and network and adds three columns: Credited clicks, Credited interactions and Credited amount. You can drag in “adjusted” metrics as well, such as Adjusted cost, Adjusted clicks, Adjusted CTR, Adjusted Avg. CPC and Adjusted cost / conv., which subtract the credited activity.
Google says the report is available for Search and Performance Max campaigns. It also warns about a timing mismatch: a click at the very end of a month can be credited in the following month, so the click and its credit sit in different periods. If you already send yourself a scheduled report, as in our guide to a weekly Google Ads report, this template can be saved and scheduled the same way.
How to read the numbers
The new card will make a lot of advertisers look at invalid traffic for the first time. Google’s help pages answer the questions that usually follow.
- A higher number isn’t worse news. Google says an increase in invalid clicks means its defenses caught and removed more invalid interactions from your metrics and your bill. Invalid traffic isn’t steady, so the numbers move.
- Filtered clicks and credits don’t add up to each other. You can have many filtered invalid clicks and a small credit. Google calls the two numbers “not directly related”: the column shows what was filtered before billing, and credits cover what was detected after.
- There’s no normal rate. Google says there is no industry standard for a normal invalid traffic rate. Don’t judge your account against a percentage you read somewhere.
- A spike isn’t proof. A sudden jump in clicks, or a daily budget that runs out early, can come from a seasonal trend, a news event, a competitor pausing ads, or your own changes to budgets, keywords, audiences or locations. Google suggests checking Change history first.
- Zero-second visits mislead. Many analytics tools need a second interaction to record how long a visit lasted, so a zero-second visit can simply mean the person stayed on the landing page and didn’t click again.
- Repeated IP addresses mislead too. Offices, universities, coffee shops and mobile carriers put hundreds or thousands of devices behind one public IP address, so the same address appearing many times doesn’t show one person clicking.
- Third-party tools count differently. Google says tools that monitor invalid traffic often flag clicks its own filters already removed from your bill, and that it can’t evaluate their reports because it doesn’t know their criteria. It won’t provide a click-by-click comparison.
- Your analytics will still show the visits. Filtering happens after the click, so the visit reaches your site and your analytics tool records it even when Google Ads removes the click.
Google won’t tell you which specific clicks it judged invalid, or name the sources. It says sharing those details would help bad actors work around its defenses. What it offers instead is outside checking: the Media Rating Council accredits its invalid traffic defenses for specific services and metrics, and an independent third party audits them every year.
Six checks to run this week
The card is new, but the routine around Google Ads invalid clicks takes a few minutes. Run these six checks once now, then repeat the first three each month when the invoice arrives.
- Find the card. On the Overview page, look for “Invalid traffic” and note estimated savings and credited cost for the last 30 days. If the card isn’t there, the rollout hasn’t reached you; go to check 2.
- Add the Invalid clicks column. Add it to the Campaigns table and sort by it. A campaign with far more filtered clicks than the others is the one to look at more closely in checks 5 and 6.
- Match credits to invoices. In Billing, open Summary and look for “Invalid activity” under Adjustments. If you run Search or Performance Max, open the credit report to see which campaigns the credit belongs to.
- Rule out your own changes. For any week that looks odd, open Change history for those dates. A new broad match keyword or a raised budget explains more spikes than bots do. Then read the search terms and add negatives; our guide to Google Ads search terms has a free script for that.
- Tighten where ads can show. The default location option reaches people in, regularly in, or who’ve shown interest in your locations. Google’s guide to clicks outside your target area says to switch to “Presence” to reach only people likely to be physically there. Exclude placements that don’t fit; account-level placement exclusions now also apply to search partner sites.
- Exclude IP addresses only for a reason. You can exclude up to 500 IP addresses per campaign, or set account-level exclusions that cover every campaign type, including Performance Max. Google’s own example is your company’s network. Given how many people share one address, treat this as a narrow tool, not a defense against Google Ads invalid clicks in general.
Checks 4 and 5 overlap with launch settings. If you haven’t reviewed them since the campaign was created, our list of Google Ads campaign settings covers the location option, search partners and the Display Network in more detail.
What the filters can’t stop: invalid leads
For a lead-generation account, the costly problem is often not the click but the form fill. Google’s help page on preventing invalid leads explains why its filters don’t solve this on their own: most traffic checks happen after your ad serves, so a bot can still reach your website and submit a form even when Google later marks the click invalid and doesn’t bill it. Real people also submit fake email addresses and phone numbers.
Google calls lead quality a shared responsibility and lists what the advertiser should do:
- Add reCAPTCHA to your web forms.
- Use double opt-in. Send a confirmation link by email, and only count someone as a valid lead once they click it.
- Validate on the server. Sophisticated bots can bypass checks that run in the browser. Google suggests server-side scripts that confirm an email address has a valid domain and a phone number matches a real regional format before the lead reaches your CRM.
- Optimize for better goals. Focus campaigns on goals such as Qualified lead, Converted lead, Book appointment or Request quote, rather than any form submission.
- Connect first-party data. Set up the Google tag and enhanced conversions so bidding learns from real customers.
- Control placements. Use content and placement exclusions, and brand exclusions where they apply.
The goal change matters most with automated bidding. If a campaign optimizes toward every form fill, junk submissions count as success and the system looks for more of them. Pointing it at qualified leads removes that reward.
When to ask Google to investigate
If the six checks don’t explain what you’re seeing, Google accepts investigation requests for possible invalid traffic that wasn’t filtered automatically. The request covers activity within the last 60 days and goes through the Click Quality Form. Google’s help page lists what to gather first:
- Your 10-digit customer ID and the exact dates of the suspicious activity.
- The campaign and ad group names, and any keywords driving the unusual traffic.
- Web server logs: IP addresses with repetitive clicks or clicks without conversions, browser and device details, and the Google click identifiers (GCLIDs) for the suspicious clicks.
- For lead problems, a spreadsheet with the GCLID for each lead and your assessment of it, such as what happened when you emailed or called.
- A short explanation of why it looks suspicious. Google’s example is a 300% spike in clicks without more conversions, or clicks from outside your targeted locations.
Set expectations before you send it. Google says specialists review the data manually, which typically takes several business days, and that you’ll get an email with the findings. If they find invalid traffic the filters missed, Google tells you about any credits. The investigation won’t confirm whether specific clicks were marked valid or invalid.
Keep GCLIDs with your leads from now on, even if nothing looks wrong today. They’re the detail an advertiser is least likely to have when a problem appears, and the 60-day limit doesn’t leave time to start collecting.
The copy-ready checklist
Copy this into your notes. The first group is the monthly part; the rest is for when a week looks wrong.
INVALID CLICKS: 6 CHECKS
SEE WHAT GOOGLE FILTERED
[ ] Overview: Invalid
traffic card (if it's
in your account yet)
[ ] Campaigns: add the
Invalid clicks column
[ ] Billing > Summary:
Invalid activity under
Adjustments
[ ] Report Editor: Invalid
Activity Credit Report
RULE OUT ORDINARY CAUSES
[ ] Change history for the
spike dates
[ ] Search terms: add
negatives
[ ] Location option set to
Presence
[ ] Placements and IPs
excluded on purpose
PROTECT YOUR FORMS
[ ] reCAPTCHA on forms
[ ] Server-side checks
[ ] Double opt-in emails
[ ] Lead goal: qualified,
not any form fill
STILL LOOKS WRONG?
[ ] Gather dates, GCLIDs,
IPs, server logs
[ ] Click Quality Form
within 60 days
The monthly lines fit into the money block of our 20-minute Google Ads checklist, next to spend against budget.
A worked example: a roofing company
Here’s how the checks might play out for an invented roofing company running one Search campaign. Every number is made up to show the method.
- The worry: clicks for the week jump from the usual 140 or so to 230, with no extra quote requests. The owner suspects a competitor.
- The card: it isn’t in the account yet, so the owner adds the Invalid clicks column instead. It shows 41 for the week. Those 41 were filtered and aren’t among the 230 billed clicks.
- Billing: last month’s summary has a $18.40 “Invalid activity” adjustment. The credit report ties it to the same campaign.
- Change history: a broad match keyword was added on Monday. The search terms report shows 52 clicks on searches about roofing jobs and training.
- Locations: the campaign uses the default location option, and 27 clicks came from people in other states searching for the city’s name.
- What’s left: the week had 90 more clicks than usual. Job seekers and out-of-state searchers account for 79 of them, leaving 11, which is ordinary week-to-week variation.
The fix is three settings, not an investigation: negative keywords for jobs and training, the location option switched to Presence, and reCAPTCHA on the quote form. The owner also starts saving the GCLID with each quote request, so a real problem later can be reported with evidence. Nothing here was invalid traffic that Google missed; it was valid traffic the campaign shouldn’t have invited.
The bottom line
Google’s new Invalid traffic card doesn’t change what you pay. It shows what Google already filtered and credited: estimated savings before billing and credited cost after. Use it with the Invalid clicks column, the Billing adjustments and the credit report to answer the question “was I charged for this?” Then spend your effort where Google’s filters don’t reach: search terms, location options, placements and the forms that collect your leads. If something still looks wrong after that, collect the evidence and file an investigation request within 60 days.
For the year’s other platform changes, see our running list of Google Ads updates for 2026, and for free and paid tools around the account, PPC Tools for Google Ads.
Frequently asked questions
What are Google Ads invalid clicks?
Clicks on your ads that don’t represent a genuine interest in your business. Google’s examples include bots and other automated traffic, accidental clicks caused by poor ad placement, and manual clicks meant to raise your costs or a publisher’s income.
Do I pay for Google Ads invalid clicks?
No. Google says you aren’t charged for invalid clicks or impressions. Clicks it identifies before the end of the billing cycle are removed from your metrics and your bill, and traffic detected later is credited where appropriate and possible.
Can I get a refund for Google Ads invalid clicks?
Google doesn’t describe it as a refund. Traffic filtered before billing is never charged, and traffic found afterward comes back as an “Invalid activity” credit on a later invoice. If you believe something was missed, you can request an investigation for the last 60 days.
Where is the Invalid traffic card in Google Ads?
On the Overview page in the Campaigns menu. It shows estimated savings and credited cost for your date range, with a “View details” link. Google is rolling it out gradually, so it may not be in every account yet.
What is a normal invalid click rate in Google Ads?
Google says there is no industry standard for a normal invalid traffic rate. The amount varies by account and over time, and a higher count means more traffic was filtered, not that more was billed.
Why does my click fraud tool show more invalid clicks than Google Ads?
Third-party tools use their own criteria, and Google says they often flag traffic its filters already removed from your bill. Google can’t evaluate those reports and doesn’t provide a click-by-click comparison.
Can I block an IP address in Google Ads?
Yes. You can exclude up to 500 IP addresses per campaign, or add account-level IP exclusions in Account settings that apply to all campaigns. Many devices can share one address, so use exclusions sparingly.
How do I report invalid clicks to Google?
Use the Click Quality Form in Google Ads Help. Have your customer ID, dates, campaign names, keywords, server logs and GCLIDs ready. Google says a manual review typically takes several business days.
Related guides
- Google Ads Campaign Settings — 10 defaults to check before launch, including the location option and search partners
- Google Ads Search Terms — a weekly triage that turns irrelevant searches into negatives
- Google Ads Checklist — a 20-minute weekly routine for spend, search terms, conversions and ads
- Google Ads Report Automation — three free ways to get a weekly email
- How to Plan a Google Ads Budget — daily budgets, 2× days and the monthly limit
- PPC Tools for Google Ads — free and paid tools for research, automation and ad testing
